40mm Heavy Duty Drilling Cum Milling Machine

READ MORE REQUEST A QUOTE
40mm Drilling cum Milling Machine Manufacturer in Gujarat | Maan Technoplus

  • Features

  • Technical Specification

Key Features

  • Main Spindle is made of "EN8" material and hardness

  • MT-bore internally grinded

  • Accuracy and run out of 0.01 to 0.03 in main spindle shaft

  • Pinion Shaft is made of "EN8" material and hardness

  • Provided 4-8 speeds by accurate balancing

  • Spindle sleeve-grinded

  • Work light[As per requirement]

  • Full size work table with accurate right-angled.[390X300][Surface Grinding is available as per your required]

  • Tapper Roller facility for better sliding of drill head an arm guide

  • Coolant system [As per requirement]

  • Speeds can easily change

  • Nitride Hardened "Ram"

  • All gears are made of alloy steel[Gear Material] and Heat treatment [50 to 60 HRC] hardened & Lapped running in oil bath fitted with splined shafts

  • Ram is accurately grinded and Honing process is done in the bore body containing "Ram"

  • All the gears assemble in the machine are perfectly sized according to requirement All Bearing [SKF/NSK[Japan]/NBC Bearing]

  • All Electrical parts are good quality.[Company:L&T]

  • Pinion and worm is grinded as per the sizes required

  • Column Design is heavy thickness and grinded as per the sizes required [column size:180mm]

  • Spindle reverse and tapping control[As per your required]

  • Specially spring type balanced spindle travel

  • Manual And Auto feed options

  • The Auto feed machanism is designed in such a manner that if incase the machine gets overloaded or the drill bit may get locked during operation the machine will automatically start slipping that will prevent any accident or any kind of damages

  • Drilling last capacity : 40mm

  • Heavy Duty structures

  • Strongly ribbed and thick walled base plate having built-in coolant tank. Generously Proportional & Well adequately ribbed base plates and column & arm for maximum rigidity and minimum deflection

  • This machine may be capable of drilling & milling & tapping & honing & counter-boring & spot facing & Reaming & boring and other similar utilities. Arm guide surface are precision scraping process

  • Wooden case available on demanda

  • No.1 Suppliers Worldwide
  • Certified ISO 9001:2008
  • Leading Service Provider

Optional Accessories (At Extra Price):

  • Fabrication Table for the machine
  • Milling adaptor attachment for the machine
  • Coolant Pump with Fitting
  • Coolant tank for pump
  • Machine Lamp
  • rotary table
  • Drill Chuck with key & arbor
  • Drill Sleeve
  • Drill vice
  • Special T-Bolts
  • Foundation Bolt

Specification in MM:

Sr No. Model No. MAAN 40mm
A Capacity
1 Drilling capacity in M.S. 40
2 Rough Boring in M.S. 50
3 Tapping in M.S. 30
4 End milling in M.S. 25
B Drilling in Head
1 Spindle hole Taper MT-4
2 Spindle Travel 250
3 No. Of Spindle Speed/Range 8/80-2600 RPM
4 Diameter Of Ram 78
5 Auto Feed Range(mm x rev) Fine Feed [hand feed]
6 Collet Holder MT-4 / E 40
C Working Range
1 Max/Min Dist from nose to table 550/155
2 Dist. From Spindle Centre To Column centre 325
3 Working table 815 X 250
4 Longitudinal travel 425
5 Cross travel 305
6 Column diameter 120
7 Machine measurement 1300 X 1170 X 1870
D Power
1 Electric Motors 415V,3PH,50Hz
2 V-belt 2 HP
 
  • Note : All the above designs,dimensions and details are approximate only and we reserve the right to alter them without prior notice as we are improving the design.
Message Us on WhatsApp